
Sizing errors are the most expensive mistakes in LED projects, because they cannot be fixed later. A screen installed too small cannot be enlarged without rebuilding the structure; a screen too large wastes budget and overwhelms the space. The correct size is derived, not guessed.
Step 1: identify the farthest critical viewer
Two distances drive the decision:
- Closest viewer sets the maximum pixel pitch (sharpness).
- Farthest critical viewer sets the minimum screen height, because text and faces must subtend enough of the viewer’s field of view to be legible.
For most applications, a screen should occupy at least 8–10 % of the total viewing distance in height. For advertising where a message must register in seconds, use 15–20 %.
Step 2: derive height from distance
| Application | Ratio of height to distance | Example |
|---|---|---|
| Conference room presentation | 1 : 5 | 8 m room → 1.6 m high |
| Retail window / signage | 1 : 6 | 12 m → 2.0 m high |
| Control room wall | 1 : 4 | 6 m → 1.5 m high |
| Stadium perimeter | 1 : 10 | 60 m → 6 m high |
| Highway billboard | 1 : 12 | 150 m → 12.5 m high |
These ratios are starting points, not absolutes. Content density changes them: a control room showing individual characters in a dashboard needs a much larger screen than a room showing full-bleed video.
Step 3: check native resolution
Once you know the physical size, divide by the pixel pitch to get pixel dimensions. This is where projects quietly fail: a 5 m × 2.8 m wall at P3.91 gives 1,279 × 716 pixels — not quite 720p. Full HD would need P2.6 or finer at that size.
| Target resolution | Screen 5 m wide needs | Screen 8 m wide needs |
|---|---|---|
| 1280 × 720 | P3.9 or finer | P6.25 or finer |
| 1920 × 1080 | P2.6 or finer | P4.1 or finer |
| 3840 × 2160 | P1.3 or finer | P2.0 or finer |
If the native content is 4K and the screen only supports 1080p, the system will scale it — and the perceived quality drop is often blamed on the display itself.
Step 4: apply aspect ratio constraints
Standard content is 16:9. A wall of 5 m × 2.8 m is close to 16:9; 5 m × 4 m is not, and content will be letterboxed or stretched. If the structure must be a particular shape, decide in advance whether content will be custom-designed for it. Many retail facades now use ultra-wide ratios deliberately, with content designed to match.
Step 5: verify sight lines and installation height
- Bottom edge at least 2.5 m above ground for public spaces;
- Top edge within about 20° above the viewer’s horizontal sight line;
- Rear clearance of 600–800 mm for service, or a front-maintenance design;
- Structural load check on existing walls, especially for glass facades.
Two worked examples
Church auditorium. Room depth 18 m, farthest pew 18 m from stage. Using 1:6, screen height 3 m; using 16:9, width 5.3 m; nearest viewer 4 m sets pitch at P2.6–P3.9. A 5.3 × 3 m P3.9 screen is the efficient answer, delivering about 1,359 × 769 pixels — appropriate for a worship environment where the screen supports rather than dominates.
Retail street corner. Pedestrians pass at 6 m, vehicles at 40 m. Nearest viewer at 6 m suits P4.8 or finer; at 40 m, a 6 m × 3 m screen occupies a reasonable field of view. P4.8 delivers 1,250 × 625 pixels — adequate for short, high-contrast advertising loops.
Get a sized proposal
Send us the room or site dimensions, closest and farthest viewing distances, and a photo of the wall. We will return a sized layout, pitch recommendation and 3D rendering at no cost — see our LED solution services or browse church LED wall and stadium LED case configurations.
Related reading from the BRETOK technical team
These guides cover the decisions that usually follow this article: choosing a pixel pitch, sizing a screen, setting brightness and specifying weather protection for outdoor installations.
- LED pixel pitch selection guide (P1.2 to P10)
- 8 common LED screen faults and how to fix them
- LED screen brightness in nits explained
Turning the theory into a specification
Compare the six product families on the products page, or send your screen dimensions, viewing distance and installation environment to the quotation form for a written, factory-direct quotation within 24 hours. BRETOK products carry CE, ROHS, FCC and ETL certification, a 2-year warranty and a 72-hour aging test before shipment.
Technical note: figures in this article are typical ranges published by BRETOK and apply to standard configurations. Project-specific values are confirmed in the written quotation. Reviewed November 2026.
